Concrete Floor Grinding and Polishing Machine
HW-6A Concrete and Terrazzo Floor Grinding and Polishing Machine is designed to solve the grinding, polishing and other progress of the stone floor, slag floor. Therefore, this machine features excellent ergonomics significantly, reasonable structure, easy operation.The machine features:
1, there is a fixed level of two tranches classic speed (no conversion, rough grinding, fine grinding disc torque, grinding force stability).
2, the flexibility to replace the two disc size, weight, foot (disc pressure enough), suitable for the needs of different construction process of the stone floors.
3, pre-detachable flexible operation Rotary handle for the feet and a large area of grinding and polishing, the disc may be close and edge grinding and polishing.
4, functional excellence, suitable for all kinds of natural stone (such as: marble, granite, sandstone), artificial stone ground (eg: tiles, porcelain tiles, terracotta tiles ceramic stone); epoxy floor, cement floor; creativity type ground (floor) (eg: epoxy terrazzo, marble mosaic), epoxy floor Emery leveling, grinding and polishing, cleaning residue, clean technology and other construction needs.
5, flexible disc adapter, ordinary, equipped with two disc size (different process of construction requirements), the disc can fit a variety of stick-on, snap-round, horseshoe-shaped grinding blocks, grinding, automatic assembly line as a whole disc ( 8-inch, 10-inch), sized diamond grinding wheel and a dozen other Abrasives.
6, front electric lift device, removable disc most humane, and can satisfy the regulator (change) different construction techniques required disc pressure requirements.
7, the rear horizontal milling machine vertical force adjustment device (more in line with the physiological habitual bias direction), to ensure that the level of losses horizontal grinding machine and grinding blocks. Main Parameter of the Concrete Floor Grinding and Polishing Machine
|Motor revolution || 1450r/min|| 1420r/min|
|Starting Voltage || AC 24V|| AC 24V|
|Net weight|| 250kg|| 200kg|
|Tank capacity||40L|| 38L|
|Disc diameter||Notches disc 300mm \ 430mm disc grinding and polishing||Notches disc 300mm \ 430mm disc grinding and polishing|
|Lifting way||Electric front, rear hand||Electric front, rear hand|
|Package|| Wooden box || Wooden box|
|Package Dimension||120×70×105|| 125×70×105|
|Note: 1. This machine is a belt drive, hang-shift gearbox, two-speed and single-speed two models, can change the machine torque without Frequency conversion|
|2, Front independent 380V, 370W motor control movements, disc pressure can be adjusted. Safer with 24V low start system.|