Main Introduction of HW-P100A Pavement Electric Walk Behind Epoxy Floor Sweeper Machine
HW-P100A Pavement Electric Walk Behind Epoxy Floor Sweeper Machine is ideal for cleaning areas both large and small, running on eco-friendly, sealed 12-volt-batteries which eliminate the worry of tripping over a power cord. This sweeper offers a convenient on-board battery charger, plus whisper quiet operation perfect for day-cleaning indoors on any floor type. With 1000mm wide cleaning path and easy maneuverability, this sweeper picks up all types of debris even hard-to-pick-up items such as sand, popcorn, packaging material, tags, and clips. The HW-P100A walk behind sweeper is suitable for schools, hospitals, airports, commercial office buildings, theaters, retail, stores, casinos, sports facilities...
HW-P100A Pavement Electric Walk Behind Epoxy Floor Sweeper Machine is the most effective solution for dust-free sweeping in small and narrow areas. Rugged design, low noise level and dust-free sweeping for both in and out door use. Fast, efficient sweeping for hard and soft floors. The filters can be replaced and the brooms can be adjusted/changed.
Key Features of HW-P100A Pavement Electric Walk Behind Epoxy Floor Sweeper Machine
l Ideal replacement for manual sweeping
l Moves easily from hard floors to carpeted spaces and back again
l The larger capacity of 40Ah battery for continued long time working.
l Adopt new type material for tire, better for the life of tire.
l The simple operative system, easy for workers to use.
l The main brush and side brush can be adjusted. This is designed for long use of brush.
l Dust-control filter system for improved air quality
l The simple operative system, easy for workers to use.
Working Method of HW-P100A Pavement Electric Walk Behind Epoxy Floor Sweeper Machine
The side brush collects dirt from the corners and edges and sweeps it into the path of the wide main broom. This, in turn, conveys the dirt into the hopper using an overthrow method. The fine dust is collected by the vacuum impeller and separated by the filter. Only dust-free filtered air leaves the machine.
Main Parameter of of HW-P100A Pavement Electric Walk Behind Epoxy Floor Sweeper Machine
| No. |
Item name |
Unit |
HW-P100A |
| 1 |
Sweeping paths |
mm |
1000 |
| 2 |
Productivity |
m 2 /h |
4000 |
| 3 |
Main brush length |
mm |
400 |
| 5 |
Power supply |
v |
12 |
| 6 |
Continuous working time |
h |
4 |
| 7 |
Waste hopper capacity |
L |
22 |
| 8 |
Side brush's diameter |
mm |
350 |
| 10 |
Operation power |
w |
120+30+35*2 |
| 15 |
Filter surface |
m 2 |
1.5 |
| 16 |
Weight with batteries |
kg |
65 |
How to choose the right sweeper
Sweepers must be tough and reliable so look for rugged steel chassis and robust running gear. Hoppers should be large and easy to empty, ideally they will be placed behind the main brush or at the rear of the machine so they don't obstruct the driver's view of the work area. Walk behind sweepers should be light and easy to use, and powerful enough to to work for a full shift if required. Sweepers being used in warehouses are made even more effective by the addition of a separate vacuum cleaner for cleaning within the storage system as shown in this example. Large ride-on sweepers will need hydraulic hopper emptying and look for vacuum systems on the side-brushes to eliminate the dust caused by sweeping process. Larger sweepers should be equipped with electric filter shakers to keep the vacuum system working at its optimum.
Learn more about cleaning equipment knowledge via facebook: https://hwawin.en.made-in-china.com
Audited Supplier 
){kind=link}